14
2.0
OPERATING INSTRUCTIONS FOR POOL CLEANERS
2.1 Cautions
a.
Power supply unit position
The power supply unit must be correctly positioned so that the device can reach all corners of
the pool and must be fixed at a minimum distance of 3.50 metres from the edge of the pool.
Before connecting the cleaning device to the power supply, check that the voltage and
frequency of your electrical network correspond to the instructions on the label on the
back of the power supply
AND THAT YOUR INSTALLATION CONTAINS A
DIFFERENTIAL PROTECTION OF 30 MA.
2.2 Important !
a. To immerse the cleaner
Lift the device by the handle or belt and plunge it into the pool. Present the device vertically
facing the wall. Tilt the unit to the side to remove trapped air from the inside. The pool cleaner
will then sink to the bottom of the pool.