
Parameter settings
To access the parameter settings, switch the Orbry Smart Touch
OFF
and immediately press the
button for two (2) seconds. You
can set the desired values by pressing <<
OR
>>. Go to the other pag-
es by pressing
PRE
or
NEXT
. The upper limit should not exceed 28°C.
PROGRAMMING THE ORBRY SMART TOUCH
Menu
01
-8°C ~ 8°C
Temperature Offset
03
5°C ~ 35°C
Set Point Maximum
05
I only, E only,
I & E, I or E
NTC Select (Ambient – I, Floor – E)
07
5°C ~ 10°C
Low Protection Minimum
09
5°C ~ 90°C
High Protection Minimum
11
1% ~ 100%
Min. Backlight Brightness of Standby Status
13
Normal (NO);
Inverted (NC)
Relay Output
02
0°C ~ 3°C
Dead Zone
04
5°C ~ 35°C
Set Point Minimum
06
5°C ~ 10°C
Low Protection Maximum
08
5°C ~ 90°C
High Protection Maximum
10
3s ~ 180s
Backlight off Time after Operation
12
0s ~ 250s
Relay Delay Time
14
<< or >>
Restore
Description
Range