ORBOT Slim, Operating Manual

Page: 10 / 24

OPERATION
Handle Position
Before powering ON the machine, lower the
handle into a comfortable position by pulling
out the pull-pin lever located on the lower left
side of the handle fork.
Operating Machine
Turn power switch on, and begin to maneuver
the machine over the floor surface.
The machine can be moved in all directions.
When cleaning carpet, the machine is best
moved forward to backwards, while spraying
only forward.
Operating Option
To increase operator comfort, the wheel
kit can be lowered down onto the floor by
releasing the pull-pin lever and choosing the
desired height.
Spray System
To apply water or detergent to the floor
surface, press the spray switch located on the
top right side of the handle.
System Light Indicators
(Located on Top of Motor Cover)
Blue lights:
• One Blue Light: Low Battery Level
• Two Blue Lights: Medium Battery Level
• Three Blue Lights: Full Battery Level
Red light:
• Machine is working over full load capacity.
Run times will lessen.
Green light:
• Machine is working under light load
capacity. Run times will increase.
10