GUIDE TO GENUINE ORBOT MICRO ACCESSORIES
9
e)
Aqua Soft Carpet Brush
(Fine, Durable Carpets, Auto & RV Carpets & Upholstery)
i. Recommended applications: Perfect for most carpets
f)
White Standard Carpet Brush
(Auto & RV Carpets & Interiors,
Tile & Grout, Durable Carpets)
i. Recommended applications:
The white brush is designed for
more vigorous cleaning of floor
mats; more durable carpets
g)
Black Scrub Brush
(Tile & Grout, Truck Bed Liners, Heavy Scrubbing)
i. Recommended applications: cleaning tile
and stone floors, pick-up truck bed liners
ORBOT MICRO has two heads rather than the single head common on other orbital-motion tools. As
soon as the ORBOT MICRO is placed on a working surface and powered on, orbital “hand-rubbing”
action takes place. Each sides reactive forces from its polishing or scrubbing is counteracted by the
opposite side. Therein lies the secret of the tool’s ability to do many different types of jobs that could
not be done with a single head orbital or a rotary tool. The two heads move in a circular motion
without forced spinning and are timed and weighted to balance away vibration forces. All the energy
from the motor is directed to the polishing or scrubbing action, and none returned to vibrating the user.
IMPORTANT OPERATION INFORMATION: EXCESSIVE PRESSURE DOES NOT IMPROVE
PERFORMANCE AND MAY DAMAGE THE TRANSMISSION.
The hand-like action of the polisher’s heads prevents surface damage regardless of the pressure
applied. Move the machine slowly. You need not be afraid of burning, gouging, or swirling the
surface.
Pad Care Instruction
Cleaning your pads well, before they dry, will extend their life. Use a mild detergent and warm water.
DO NOT WASH PADS IN GASOLINE OR SOLVENTS.
For maximum life, be sure to clean pads
after each use. To clean, spray mild detergent on the pad face, work in, and let soak in a container of
water-diluted detergent. After soaking, rinse out and squeeze dry (do not twist or wring). Then allow to
air dry. Do not allow compounds to dry in pads.
Superzorb Pad Instructions
a) Disconnect from power source. Lay the machine with heads facing up on your lap, a bench or
flat surface. You can use the insert removed from inside the box to support and hold in place.
b) Center the pads onto the velcro driver plates.
c) Stretch pad’s elastic ring over driver plate. Make sure plate is completely covered.
The elastic band should be placed so as to not come in contact with each other when running.
d) Rotate each head to ensure that pads do not contact each other. If pads contact each other,
smooth out pads to remove any wrinkles and ensure elastic bands do not make contact.
e) Refer to General Cleaning Instructions
MACHINE OPERATING INSTRUCTIONS
