IV. Other Features
Firmware Upgrade
[Home>Tools>Upgrade or Advanced Setup>System>Upgrade]
•
After file copy or download through Network, and restart the system, and this make upgrade done.
•
After Upgrade done, System restarts again, so
Total 2 System Reboots. Please note.
•
When choosing Network upgrade, System automatically checking latest version in our Server and
upgrade firmware. But users want to upgrade firmware upgrade manually, please download latest
firmware in USB and upgrade it.
USB
Upgrade firmware through USB device.
N
etwork
Automatically checking latest version in our Server
and upgrade firmware.
•
Recommend to use Network, however, when Network is slow or unstable, please use USB.
Resolution
•
Default Resolution setting in System is 1024*768 to support all low-end monitors.
•
When using HD-SDI , please use Recommend Monitors above.
•
Recommend Resolution : 1920*1080p(50Hz PAL/60Hz NTSC)
•
If monitors can’t support resolution and need System Recovery, please use System Recovery Mode.
•
Go to Recovery Mode
: While pushing Reset Button in Rear, and Power On. After that, System Recovery
Mode starts with Buzzer.
Recommend Monitor Resolution
1024*768p(60Hz)
1920*1080p(25Hz)
1280*720p(50Hz)
1920*1080p(30Hz)
1280*720p(60Hz)
1920*1080i(50Hz)
1280*1024p(60Hz)
1920*1080i(60Hz)
1360*768p(60Hz)
1920*1080p(50Hz)
1440*900p(60Hz)
1920*1080p(60Hz)
1600*1200p(60Hz)
1920*1200p(60Hz)
1920*1080p(24Hz)
Quick Guide----------------------------------------4
Summary of Contents for OD series
Page 1: ...Quick Guide ...