Wi-Fi
1. Download and install the free
Orbitsound
app.
Follow the in-app instructions.
WI-FI RESET:
If you are having difficulty connecting your speaker
via Wi-Fi, reset the Wi-Fi settings by pressing and holding the
(SOURCE)
button for 10 seconds.
2. When prompted by the app, press and hold
(
SOURCE
) on the control panel or remote control
for three seconds. This enters Wi-Fi setup mode to
enable the DOCK to connect to your Wi-Fi.
Wi-Fi enables seamless streaming and the ability to
connect multiple speakers.
WI-FI RESET:
10 seconds
SETUP:
or 3 seconds
Bluetooth
BLUETOOTH RESET:
If you are having difficulty connecting, do a reset
by pressing and holding the
VOLUME DIAL
and
BLUETOOTH
buttons
for 5 seconds.
NOTE:
If you are using a wireless subwoofer with the DOCK, after a
Bluetooth reset, you will need to re-pair it. See ‘SUBWOOFER PAIRING’.
BLUETOOTH PAIRING:
Press and hold
(BLUETOOTH)
on
the control panel or
(PLAY)
on the remote for 3 seconds.
The dial will show a seeking animation. Look for ‘Orbitsound
DOCK E30’ in your device’s Bluetooth list and tap to connect.
To use your phone / tablet with Bluetooth, you need
to pair it to the DOCK E30:
BLUETOOTH PAIRING:
or 3 seconds
BLUETOOTH RESET:
5 seconds
Orbitsound DOCK E30
Connected
13
12
