Orbitel OBT-58108, User Manual, Page: 18 / 27

Página 18 de 27
In point-to-Multipoint mode, must test every chain .
Notice: In the point-to-Multipoint mode, central point input from for central point
distance to get most far point, the far point is before reaching the real distance of
central points for each point.
Wireless
Picture9 Advanced Wireless Settings
According to your environment , choose the corresponding work pattern:
Point to point —In this mode, equipment that is wireless outdoor bridge communication with
another bridge mode only.
Point to Multipoint -- Choose only when this equipment is for the main fact in the wireless
device group of the mode of the bridge. There is not a network bridge and must be established as
the point-to-point mode of bridge graft in mode of other bridges, use MAC address of this
equipment. Have network bridge send all flow " main fact " have network bridge , but not direct
communication each other while being other.
Notice: You must input MAC Address of the Remote Wireless Outdoor Bridge.
Notice: In the point-to-Multipoint mode, input the Remote MAC Address to first line
(Remote MAC address 1 ), wait for all far point is it join after testing to make, input
all Remote MAC Address to the field.