![Orbitalum 790 008 001 Translation Of Original Operating Instructions Download Page 20](http://html.mh-extra.com/html/orbitalum/790-008-001/790-008-001_translation-of-original-operating-instructions_1648231020.webp)
ORBITALUM TOOLS GmbH
D-78224 Singen www.orbitalum.com
[REV. 20191205] OC_MRA_BA_790008761_00__INH-02_EN
20
Information and safety instructions for the responsible body
MRA
eNGLISH
2. INFORMATION AND SAFeTY INSTRUCTIONS FOR
THe ReSPONSIBLe BODY
2.1
Requirements for the responsible body
Workshop/outdoor/field application
: The responsible body is responsible for safety in the danger zone around the
machine, and should allow only qualified personnel to enter the zone or operate the machine in the danger zone.
employee safety
: The safety regulations described in chap. 2must be observed and work must be carried out with safety in
mind using the prescribed protective equipment.
2.2
Using the machine
2.2.1 Proper use
• The machine should be exclusively used for cutting of materials and tube dimensions as specified
Proper use also includes the following:
• observing all safety instructions and warning messages included in these operating instructions
• carrying out all inspection and maintenance work
• sole use in the original condition with original accessories, spare parts and materials
• processing only materials set out in the operating instructions.
2.2.2 Improper use
• A use other than that defined under "proper use" or a use that goes beyond this or the specified
constraints shall be considered improper use due to the potential risks involved.
• The responsible body shall be solely responsible for damages that arise through improper use and
the manufacturer shall assume no liability whatsoever.
• No tools should be used that have not been authorized by the manufacturer for this machine.
• The removal of safety equipment is not permitted.
• Do not misuse the machine.
• The machine is not intended for use by private consumers.
2.2.3 Machine constraints
• Keep your working area clean. Disorder or unlit working areas can lead to accidents.
• The workplace can be in tube preparation, in plant construction or in the plant itself.
• Work lighting: min. 300 Lux.
• Operator age: at least 14 years old and without physical impairments.
• Operated by one person.
• Only work with the machine in dry surroundings (not in misty, rainy or stormy conditions).