7
FIG.1
ASSEMBLY INSTRUCTION:
1.PREPARATION:
A. Before assembling, make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling, please check whether all needed parts are available (above of this
instruction sheet, you will find an explosion drawing with all single parts (marked with
numbers) which the item consists of.
2.ASSEMBLY INSTRUCTION:
:
FIG.2
FIG.2:
Slide the Seat Post (12) into the Vertical
Seat Post (10) and, at the desired
position, align holes and fix in place with
the Locking Knob (25) and Flat Washer
(26). Now fix the Seat (13) to the Seat
Post (12) as shown.
Insert the Vertical
Seat Post (10) into the Main Frame (16)
and line up the holes. Secure the saddle
in position with the Adjustment Knob (7).
The correct height for the seat can be
adjusted after the bike is fully assembled.
FIG.1:
Attach the Front Stabilizer (pt.15)
to the Main Frame (pt.16) using two
sets of Ø8 Arc Washers (pt.5), M8
Domed Nut (pt.6) and M8*75 Carriage
bolt (3).
Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of
Ø8 Arc Washers (pt.5), M8 Domed Nut
(pt.6) and M8*75 Carriage bolt (3).
And the fixing the bottle holder (64)
with the screw (43)
Summary of Contents for OSP0270
Page 1: ...1 OSP0270 OSP0270 125 Kg...
Page 4: ...4 EXPLODED VIEW PARTS LIST...
