Orbit OBR8301FC Owner'S Manual Download Page 2

Before You Start 

Thank you for purchasing this Product! For your safety and benefit, read this manual carefully before 
using the machine. 

Prior to assembly, remove components from the box and verify that all the listed parts were supplied. 
Assembly instructions are described in the following steps and illustrations. 

IMPORTANT SAFETY NOTICE 

PRECAUTIONS 

BE SURE TO READ THE ENTIRE MANUAL BEFORE YOU ASSEMBLE OR OPERATE 

YOUR MACHINE. IN PARTICULAR, NOTE THE FOLLOWING SAFETY PRECAUTIONS: 

01- 

Check all the screws, nuts and other connections before using the machine for the first time and 
ensure that the trainer is in the safe condition. 

02- 

Set up the machine in a dry level place and leave it away from moisture and water. 

03- 

Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the machine in the area of 
assembly to avoid dirt and etc.. 

04- 

Before beginning training, remove all objects within a radius of 2 meters from the machine. 

05- 

DO  NOT  use aggressive cleaning articles to clean the machine, Only use the supplied tools or 
suitable tools of your own to assemble the machine or repair any parts of machine. Remove drops 
of sweat from the machine immediately after finishing training. 

06- 

Your health can be affected by incorrect or excessive training. Consult a doctor before beginning a 
training program. He can define the maximum setting (Pulse. Watts. Duration of training etc) to 
which you may train yourself and can get precise information during training. This machine is not 
suitable for therapeutic purpose. 

07- 

Only do training on the machine when it is in correct working way. Use only original spare parts for 
any necessary repairs. 

08- 

This machine can be used for only one person’s training at a time. 

09- 

Wear training clothes and shoes which are suitable for fitness training with the machine. Your 
training shoes should be appropriate for the trainer. 

10- 

If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop training and 
consult a doctor asap. 

11- 

People such as children and handicapped persons should only use the machine in the presence of 
another person who can give aid and advice. 

12- 

The power of the machine increases with increasing the speed, and the reverse. 

13- 

To reduce the risk of electrical shock, burns, fire or other possible injuries to the user, it is important 
to review this manual and the precautions before operation. 

WARNING:  BEFORE  BEGINNING  ANY  EXERCISE  PROGRAM,  CONSULT  YOUR 

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 

OR 

PERSONS 

WITH 

PRE-EXISTING 

HEALTH 

PROBLEMS. 

READ 

ALL 

INSTRUCTIONS  BEFORE USING ANY FITNESS EQUIPMENT.  

SAVE THESE INSTRUCTIONS / Maximum user’s weight: 100KGS 

Summary of Contents for OBR8301FC










Reviews: