WIRING DIAGRAM:
WIRING: Power must be disconnected during installation.
1. Run electrical as directly as possible from the wall switch to the unit.
2. Using approved connectors, connect cables wires according to the model and diagram below to the junction box.
3. Do not allow cable to touch side of unit after installation.
FAN
FAN
LIGHT
SWITCH BOX
BLK
WHT
Low CFM
S
switch
Fan
Preset switch
N
LED
Sensor
and
LED
Light
GRD
UNIT
BLK
LED NIGHT
CONTROL
IN
BRN
CIRCUIT
UNIT
BLACK(BLK)
LED NIGHT
LIGHT
SWITCH BOX
FAN
120V AC LINE IN
GROUND (GRD)
BROWN(BRN)
WHITE (WHT)
WIRE PANEL
RECEPTACLE
LINE
WHT
SWITCH
SWITCH
Delay time
Install ceiling material to complete the ceiling construction. Then cut the opening
around the fan housing. Insert the motion sensor connector into the base connec-
tor in the unit and then install the grille. To attach the grille assembly to the fan
housing, pinch the grille springs on the sides of the grille assembly and position
the grille into the housing with the grille springs in the appropriate slots. Push
the grille assembly towards the ceiling to secure.
INSTALL GRILLE:
Deluxe
ODU814M
