© 2010 Orbit
®
Irrigation Products, Inc.
All rights reserved. All trade names are registered
trademarks of respective manufacturers listed.
Orbit
®
Irrigation Products, Inc.
North Salt Lake, UT 84054 USA
www.orbitonline.com | 1-800-488-6156
PN 20020-24 rA
p 801 295 9820
f 801 951 5815
www.fluid-studio.net
1065 South 500 West
Bountiful, Utah 84010
proof no:
5
date:
03.30.10
des:
MZ
spck:
MZ
job no:
N/A
client:
Orbit
sku:
20020
upc:
N/A
file name:
20020-24 rA.indd
software:
InDesign CS3
colors
additional instructions:
· LB535940
·
color
non printing
PMS
????
PMS
????
color
non printing
PMS
????
Registration
BLACK
Printers are responsible for
meeting print production
requirements. Any changes
must be approved by the
client and Fluid Studio.
printed piece must meet
designated specifications
on this form
.
dimensions:
flat: w:
8.5"
h:
11"
finished: w
8.5"
d:
0"
h
11"
© 2007 Fluid Studio. This
work is the property of Fluid
Studio, and cannot be used,
reproduced or distributed
in any way without their
express permission.
orbit
®
|ArizonA mist
®
8 oz. And 16 oz.
PersonAl misting bottle instructions
Step 1: Filling the perSonal miSt bottle
■
Remove the cap by twisting in a counter clockwise
direction. This will separate the top from the Bottle Body.
■
Before the first use, rinse the inside of the bottle with warm
soapy water and towel dry.
■
Fill the bottle body with water, leaving approximately an inch
of space from the rim.
· NOTE: If water level is too high in the Bottle Body, it may
interfere with proper pressurization and prevent the
mist bottle from working at it’s potential.
Step 2: Sealing the perSonal miSt bottle
■
Replace the cap onto the top of the Bottle Body, by
screwing the top on in a clockwise direction.
■
Ensure the cap is on tightly.
■
Double check the water level to ensure the bottle is not
over-full.
Step 3: preSSurizing the perSonal miSt bottle
■
Holding the Mist Bottle firmly in one hand, grasp the pump
handle with the other.
■
Pump the handle 12-15 times by sliding it up and down the
pump shaft. You will feel resistance as the pressure begins
to build within your Personal Mist Bottle.
■
It IS NOT necessary for your Personal Mist Bottle to be fully
pressurized to receive cooling output.
Step 4: how to miSt
■
Pull the Thumb Lever so that it moves away from the Mist
Nozzle.
■
The cooling mist will begin immediately for your enjoyment.
Caution: Never dismantle any part of this product while it is pressurized!
Caution: Never dismantle any part of this product while it is pressurized!
depreSSurization inStructionS
Depressurization of your Personal Mist Bottle is A MUST
before refilling or removig the cap FOR ANY REASON.
■
Hold your Personal Mist Bottle upside down so the Mist
Nozzle points toward the ground.
■
Pull the Thumb Lever away from the Mist Nozzle to begin
the depressurization.
■
There will be mist coming from the nozzle for the first few
seconds.
■
Continue holding your Personal Mist Bottle upside down
until you no longer hear air escaping from the nozzle.
cleaning and care
■
Rinse your Personal Mist Bottle with warm, soapy water
before use.
■
To clean your Personal Mist Bottle, always hand wash with
warm, soapy water and let air dry.
■
DO NOT PUT YOUR PERSONAL MIST BOTTLE IN THE
DISHWASHER.
■
DO NOT FREEZE WATER INSIDE OF YOUR PERSONAL MIST
BOTTLE.
■
Depressurize and empty any remaining water from your
Personal Mist Bottle after every use.
■
Allow your Personal Mist Bottle to air dry, upside down,
after every use.
■
Should the Mist Nozzle become clogged with calcium and
mineral buildup, DO NOT stick any sharp objects into the
orifice of the Mist Nozzle. Ensure your Personal Mist Bottle
is depressurized, unscrew the Mist Nozzle and soak, in a
glass dish, in vinegar or Orbit
®
|Arizona Mist
®
Nozzle Cleaner
overnight. Rinse well and screw back into your Personal
Mist Bottle.
