manualshive.com logo in svg

Orbit Merret OMR 700 Series, User Manual, Page: 5 / 32

Share
Download
Orbit Merret OMR 700 Series User Manual Download Page 5

USER GUIDE

 OMR 700

  |  

5

148.9~C

-263mm

453mV

2.

DESCRIPTION 

OF THE  INSTRUMENT

Modules

The development of the device has been performed with an increased emphasis on technical solutions and 
universality. Card design not only allows their use in any position of the recorder, but also their additional 
insertion into vacant slots. Thus, if new requirements to increase the number or Typee of inputs and outputs 
occur in the course of using the recorder, just order yesther card and insert it into a vacant slot. In this way the 
instrument can „grow“ in compliance with your requirements.
All analogue modules are fully isolated from the internal bus, and some cards have galvanic isolation even 
between individual channels.
Basic version of the recorder includes power supply module and communication module with Ethernet 10/100, 
RS 485 (MODBUS), five digital inputs and two digital outputs.   

The files on the DVD

Manuals

Recorder_Manual_2.0.2_en 

User Manual - EN

Manual_OMR700_2018_2v0_en User 

Guide 

- 

EN

Software

Recorder 

 

 

PC Programme for Remote Viewing of Measurements in Real Time

OMRViewer   

 

Recorded Data Viewer for OMR700

and current data sheets 

Summary of Contents for OMR 700 Series

































Reviews:

No comments