Assembly Instructions
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain assistance, and follow the
assembly steps sequentially, the process will take time, but is fairly easy.
Required Tools:
9/16” Open-End Wrench
11/16” Open-End Wrench
3/4” Open-End Wrench
13/16” Open-End Wrench
Assembly Tips:
Read all “Notes” on each page before beginning
each step.
While you may be able to assemble this unit
using the illustrations only, important safety
notes and other tips are included in the text.
Some pieces may have extra holes that you will
not use. Use only those holes indicated in the
instructions and illustrations.
NOTE: T
o find out the length of a particular bolt,
measure its shank (the long, narrow part beneath
the head). Refer to the following diagram:
Do not fully tighten bolts until
instructed to do so.
Note: After assembly, you should check all
functions to ensure correct operation. If you
experience pr
oblems, first
recheck the
assembly instructions to locate any possible
errors made during assembly. If you are
unable to correct the problem, call the
dealer from whom you purchased the
machine or call 1-800-556-3113 for the
dealer nearest you.
5
