10
EXERCISE COMPUTER:
FUNCTIONAL BUTTONS
:
MODE
Press it to select functions.
Hold it for 3 seconds to reset time, distance and calories.
SET
(if available)
To set value of time, distance & calories when not in scan mode.
RESET
(If available)
Press to reset time, distance and calories.
FUNCTIONS:
1.
SCAN
: Press MODE button until “
▼
” appears at SCAN Position (or until “SCAN”
appears), computer will rotate through all the 5 functions: Time, Speed,
Distance, Calorie and total distance. Each display will be hold for 4 seconds.
2.
TIME
: Count the total time from exercise start to end.
3.
SPEED
: Display current speed.
4.
DIST
: Count the distance from exercise start to end.
5.
CALORIES (CAL)
: Count the total calories from exercise start to the end.
6.
TOTAL DIST (ODO)
: Count the total distance after installing the batteries.
7.
AUTO ON/OFF & AUTO START/STOP
: Without any signal for 8 minutes, the power
will turn off automatically. As long as the wheel is in motion or press any
button, the computer is in action.
8.
ALARM:
The functions of time, distance and calorie can be set countdown, any of
above value goes to zero, the computer will alarm for 15 seconds. Press
MODE to select the function, then press SET to adjust the value.
Note
:
●
The product with only “MODE” button has no No.8 function.
●
The computer can be programmed before delivery with Metric or Imperial
system. If you find “M” in right side of monitor screen, it is with Imperial system
and the unit will be mile.
SPECIFICATIONS
：
FUNCTION
Auto Scan
Every 4 seconds
Running Time
00:00 ~ 99:59 (Minute: Second)
Current Speed
The max pick-up signal is 99.9KM/H or
MILE/H (or 1500RPM)
Trip Distance
0.00 ~ 99.99 KM or MILE
Calories
0 ~ 999.9~ 9999 Kcal
Total Distance
0 ~ 9999 KM or MILE
Battery Type
2 pcs of SIZE-AAA or UM4
Operating Temperature
0°C ~ +40
°
C(32°F ~ 104°F)
Storage Temperature
-10°C ~ +60°C (14°F ~ 140°F)