ASSEMBLY INSTRUCTIONS
NOTE:
There are some packing parts attached on the
Air Bike
.
Please follow the steps below to
remove them before any assembly. These parts are only for packing, do not dispose of the
packing materials until assembly is completed.
STEP 1
Remove the
CARDBOARD ROLLER
from the front of the
MAIN FRAME(1)
by removing the
BOLTS.
Make the
TRANSPORT
WHEELS(43)
on the
FRONT STABILIZER(40)
face the front, then attach the
FRONT STABILIZER(40)
to the
MAIN FRAME(1)
with
BUTTON HEAD BOLTS(M10x1.5x20mm)(108)
and
ARC
WASHERS(M10)(112).
STEP 2
Remove the
CARDBOARD ROLLER
from the back of the
MAIN FRAME(1)
by removing the
BOLTS.
Attach
the
REAR STABILIZER(44)
to the
MAIN FRAME(1)
with
BUTTON HEAD BOLTS(M10x1.5x20mm)(108)
and
ARC WASHERS(M10)(112).
NOTE:
See page 12 for detailed leveling instructions to prevent rocking.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
4
Cardboard Roller
Bolts
Cardboard Roller
Bolts
