Orbit baby O2, Instruction Manual

Page: 19 / 26

Manual Text Booklet – Orbit Baby O2 Stroller Base –
ENGLISH – 13
Cleaning and Maintenance
⚠ WARNING ⚠
•
Wheel can detach if not securely attached. Pull on the wheel to assure it is securely attached.
•
Air tires tend to lose pressure over time so please ensure that all tires are inflated to the specified pressure shown on the side of each
tire before use.
Cleaning Instructions:
Avoid excessive exposure to sun or heat, which may cause fading or warping. Keep the SmartHub, handlebar and folding mechanisms, and
front wheel swivel lock free of abrasive grime and moisture. If wet, use a soft cloth to dry. Regularly check all rivets, screws and safety devices
for tightness and security. Inspect wheels and tether strap and replace if necessary. All hard goods (plastic and metal) may be wiped clean with
a damp cloth. Never use bleach or detergents. Do not submerge or use running water on any metal or plastic parts of the stroller. The storage
basket
Ⓜ
and O2 Stroller Cup Organizer
Ⓘ
can be cleaned with a clean wet cloth.
Maintenance Instructions:
Always keep your tires inflated to the pressure stated on the sidewall of the tires. You can use the tire pump included in O2 Stroller Base package.
If a tire is not holding air, the O2 Stroller tires can be replaced just like most bicycle air tires. If you are not used to changing bicycle tires, we
suggest you take your O2 wheels to your closest bicycle shop to get them replaced. To remove the front wheel, use the included hex key in the
cargo basket pocket to remove the front axle. Change the tire and then retighten the axle, confirming it is tight and the wheel cannot fall off. For the
rear wheels, remove them using the quick release button, change the tire and then reinstall. Pull outward on the wheels to ensure they are securely
attached to the stroller.