TRM 16 TRM 33 TRM 53 TRM 83 TRM 103
20
BRIEF INTRODUCTION OF PRODUCT STRUCTURE
Model
Volume (L)
Rated
Power (W)
Rated
Pressure
(Mpa)
Max Temp.
Water (ºC)
Waterproof
grade
TRM 16
15
1500
0,75
75
IPX4
TRM 33
30
1500
0,75
75
IPX4
TRM 53
50
1500
0,75
75
IPX4
TRM 83
80
1500
0,75
75
IPX4
TRM 103
100
1500
0,75
75
IPX4
METHODS OF INSTALLATION
Note: Please be sure to use the accessories provided by our company to install this electric water
heater. This electric water heater cannot be hung on the support until it has been confirmed to be
firm and reliable. Otherwise, the electric water heater may drop off from the wall, resulting in
damage of the heater, even serious accidents of injury. When determining the locations of the bolt
holes, it shall be ensured that there is a clearance not less than 0.2mm on the right side of the
electric heater, to convenient the maintenance of the heater if necessary.
1.
Installation of the main machine:
a.
This electric water heater shall be installed in the solid wall. If the strength of the wall
cannot bear the load equal to two times of the total weight of the heater fully with water,
it is necessary to install a special support.
b.
After selecting a proper location, determine the positions of the two install holes used for
expansion bolts with hook (determined according to the specification of the product you
select). Make two holes in the wall with the corresponding depth by using a chopping bit
with the size matching the expansion bolts attached with the machine, insert the screws,
make the hook upwards, tighten the nuts to fix firmly, and then hang the electric water
heater on it.
