RA 2000 E RA 2500 E
12
9. Regulations concerning the disposal of the oil when
scraping the appliance have to be followed.
10. Always disconnect the heater from the main supply
when not in use and when cleaning.
11. Keep the heater a distance of at least 90cm from any
combustible material such us furniture, curtains, bedding,
cloths or papers.
12. Do not attempt to open any part of the oil fins.
13. Keep the heater clean. Do not allow objects to enter
the ventilation, as this may cause electric shock, fire or
damage the heater.
ASSEMBLY
The oil radiator is packed with the wheels unmounted. Please make sure that they are right assembled
before turning the device on.
Remove the heater and all the accessories from the carton.
1- Turn the radiator upside down carefully and place it over a carpet or any other soft surface in order not
to damage the unit.
2- Pass the “U bolt” in between the last and next-to-last fin. Screw the U bolt to the support with the help
of the wing nuts. Then, screw the wheels to the support. See pic 3.
3- Repeat step 2 in between the first and the second fin, using the other support.
4- Turn the heater the right way up. The unit should be as shown in the picture in “parts description”
section.
