Orbegozo NV 4100, Instruction Manual

Page: 14 / 30

NV 4100
14
CONNECTION TO THE MAINS SUPPLY
Make sure that the supply voltage corresponds with the voltage marked on the rating label. This
product complies with all binding CE labelling directives.
PARTS
1. Electric fan (air inlet)
2. Lid handle
3. Cool-box housing
4. Lid
5. Partition
6. Carrying handle
7. Electric fan (air outlet)
8. Control panel
9. Power cord with plug
10. Mains power plug
11. 12V plug
12. Plug for 12V cigarette-lighter socket
13. 12V connector socket
14. Mains power socket
15. Cooling indicator light (green)
16. Voltage selector switch
17. Operation mode selector switch
18. ‘Keep-warm’ indicator light (red)
GENERAL INFORMATION
This cool-box uses thermo-electric technology and is therefore able to provide cooling as well as
heating. The appliance cools down to as much as approx. 20° C below ambient temperature. The
lowest temperature that this cool box can get is 6 degrees.
OPERATION MODE SELECTOR SWITCH
1.- Position "COOL" - Green Light - Activates cooling.
2. - Position "OFF" - no light, the unit is off.
3. - Position "HOT" - Red Light - Activates heating.
VOLTAGE SELECTOR SWITCH
The voltage selector switch setting must correspond to the power source currently being used.
Always ensure that the switch is in the correct position before the cool-box is connected to any
power source.
AC power – for 230V mains operation, the voltage selector must be set to AC voltage.
DC power – for operation from a 12V power source, the voltage selector must be set to DC voltage.
Indicator lights
The ‘cooling’ function is indicated by the green light.
The red indicator light shows that the ‘keepwarm’ function is enabled.
LID
The lid can be locked by folding the carrying handle over towards the hinged side of the lid. To
unlock, move the handle to the opposite side.