HU 2013
14
USER INSTRUCTIONS
1.
Place the base of unit on a smooth level surface.
2.
Remove the water tank and fill it using room temperature water
through the water filling hatch from underneath the tank.
3.
Pour distiller water into the tank.
4.
Always use distilled water and never add anything to the water (e.g.
salt, oils,
perfumes, etc. …)
5.
Ensure that you tighten the cap on the filling hatch securely.
6.
Place the tank onto the base.
7.
Plug the appliance into the power outlet with the adapter, turn on
the ON/ OFF & steam adjusting knob. The power indicator light should
be illuminated in green colour once ready.
8.
The mist intensity can be adjusted by turning the mist adjusting
knob until the desired amount of mist is emitted from the nozzle.
9.
The light will change automatically: purple-indigo-green-yellow-
orange-red. To select one specific colour press the button when it
appears or push the button until making it appears.
10.
Ensure that the mist output nozzle is directed away from walls
and furniture.
11.
When the humidifier runs out of water, the appliance will
automatically switch off the steam production mechanism.
12.
The steam production time and emission quantity may vary
depending on the water hardness.
13.
If necessary, you can add scented oil in the holder intended
for that use (Aroma tray), and never using the water tank.
OTHER FEATURES
In cold weather, windows, and even some walls may fog or develop frost
from excessive indoor humidity. If this occurs, reduce the mist intensity
setting to avoid damage from condensed water dripping on windowsills.
Too much humidity in the room may allow moisture to accumulate on
surfaces where bacteria and fungi can grow. Collected moisture may also
harm furniture, and walls, especially wallpaper.
To eliminate too much humidity, especially in a small room, leave the
room door open, add adjust the mist intensity control setting.
When the unit is not to be used for a long time, clean and dry the it and
store at a dry place in the original package.
CARE AND MAINTENANCE
1.
Switch the appliance off and unplug it.
