DS 57190 B IN
15
7.2 Notice of cleaning cooker hood
A.
To protect the main body from corrosion over a long period of time, the cooker hood should be cleaned
with hot water plus non corrosive detergent every two months.
B.
Please do not use abrasive detergent for it will damage the body.
C.
Keep the motor and other spare parts free from water, as this will cause damage to the appliance.
D.
Before cleaning the appliance please remember to cut off power
E.
The carbon filter shouldn’t be exposed to heat.
F.
Please don’t tear open the fixed bar around the carbon filter
G.
If the plug or cord is damaged, please call an authorised after sales service to replace it.
(8) BULB REPLACEMENT
Note: if the bulb is faulty, replace
immediately.
1.
Disconnect from the mains.
2.
Remove protective glass.
3.
Replace burnt out bulb(s).
4.
Replace protective glass.
BULB 2.5W max
(9) SETTING UP AND CHANGING THE
ACTIVE CARBON FILTER
This system is used in locations without ducting to the outside or when it is not possible to install such
ducting.
Disconnect the machine from the mains.
A.
Remove metal filters.
B.
The circular filters (Figure 2) are located at either end of the motor. Turn the carbon filters anti-clockwise
until they are unscrewed.
C.
Apply reverse procedure to install the carbon filter.
Warning: the active carbon filter cannot be washed or recycled. It should be changed at least every four
months.
(10).ABNORMITY AND SOLUTION
Fault
Cause
Solution
Light on, but
motor does not
work
The leaf blocked
Get rid of the blocking
The capacitor damaged
Replace capacitor
The motor jammed bearing damaged
Replace motor
The internal with of motor off or a bad smell from the motor
Replace motor
Light does not
work, motor does
not work
Beside the above mentioned, check the following:
Light damaged
Replace lights
Power cord looses
Connect the wires as per the electric diagram
