CVT 3650 A
17
OPERATION OF THE HEATER
NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after
having not been used for a long period of time the heaters may emit some smell and fumes. This
will disappear when the heater has been on a short while.
•
Choose a suitable location for the heater, taking into account the safety instructions above.
•
Insert the plug of the heater into a suitable socket.
•
Turn THERMOSTAT KNOB fully in a clockwise direction to the maximum setting.
•
Turn on the heating elements by means of HEATER
SWITCHES on the side panel. When the heating elements are on
the switches will illuminate. For maximum heat output both
switches should be on.
•
When the desired room temperature has been reached, the
thermostat knob should be turned slowly anti-clockwise until
the thermostat is heard to click off and the lights on the
element switches are seen to go out. After this the heater will
keep the air temperature in the room at the set temperature by
switching on and off automatically.
•
The TURBO button turns on the internal fan
CLEANING THE HEATER
Always un-plug the heater from the wall socket and allow it to cool down before cleaning.
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth. Do not use
any detergents or abrasives and do not allow any water to enter the heater.
STORING THE HEATER
When the heater is not used for long periods of time it should be protected from dust and stored in
a clean dry place.
