CTP 3500
20
Important advices before cleaning:
1.
Ensure hair clipper is off and unplugged.
2.
Clean appliance Surface with wet soft cloth, don’t use abrasive detergents.
3.
Do not wipe the appliance with a hair dryer or something like that, for wiping use a dry cloth.
How to clean:
1.
Clean cutting head with brush if there is few hair in blades.
2.
Remove the cutting head pressing blade out to clean accumulated hair inside the head, use brush for it.
After this, clean the blade with brush and put oil on blade, once this is done place blade in clipper.
3.
This hair clipper is waterproof. If there is much accumulated hair in the head, it is recommended remove
head and clean it and hair clipper with water.
OTHER ADVICES
1.
The useful life of the blade is estimated in 18 months in following conditions: you use the hair clipper for
5 minutes, every day.
2.
Change the blade if you observe it is dull (it could pull of hair while you are cutting).
3.
We highly recommend to brush away the hair residual from the blade regularly, ori t may affect the
cutting performance and shorten the life of the blade.
4.
We recommend to charge the hair clipper at least once per month to keep the battery active even if the
appliance is going to be unused for long time, it can extend the life of battery.
Disposal of old electrical appliances
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the impact on human health and the
environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance
DECLARATION OF CONFORMITY: This device complies with the requirements of the EMC directive
2014/30/EU.
