CTP 1020
7
13.
In case that you need a copy of the instruction manual,
you can find it in www.orbegozo.com.
14.
WARNING: In case of misuse, there is a risk of possible
injury.
If needs to trim in a reverse direction while in haricut,
please lower one scale for the safety concern.
Do not use this appliance near bathtubs, showers, basins
or other vessels containing water.
How to use
-
Before using your trimmer for the first time as a rechargeable device, please put the ON/OFF switch in the
OFF position. It should be charged for at least 12 hours.
- Always check that the charging light is on while charging.
- Check that the blade is not damaged.
- Attach the accessory and adjust the height.
- Slide the button from OFF to ON to start cutting hair.
-
Cut the hair to the desired height by moving the device against the grain. Do not use the device inverted, it
may cut too much hair.
-
Cut the hair if the accessory cuts the hair to a height of approximately 0.5mm.
After use
-
Stop the device by sliding the ON / OFF switch.
Maintenance
-Oil should be applied to the blades once a month. Switch ON the device and turn it upside down. Spread the
oil along the blades. Then switch off the device and wipe off excess oil with a dry cloth.
-
Use the brush included to remove hair debris from the device.
-
Store the device being careful not to damage the blades until the next use. Make sure it is kept in a place
with low humidity and is not exposed to direct sunlight or other sources of heat.
- Keep the device, the oil and the brush out of the reach of children.
Cleaning
-
Unplug the appliance from the mains and let it cool down before starting any cleaning operation.
-
Make sure the power button is in the OFF position.
-
Remove the clipper attachment.
-
Brush off hair debris from the blades and the rest of the device.
-
Do not immerse the appliance in water or any other liquid or put it under the tap.
-
During the cleaning process, take special care with the blades as they are very sharp.
