CR 5012
10
4. Do not use the heater on extremely deep-pile carpets!
5. Do not use the heater in an upright position.
DESCRIPTION
A.
Air inlet grille
B.
Air outlet grill
C.
Handle
D.
Indicator light
E.
Selector switch
F.
Anti-tilt switch protector
IMPORTANT
The device has a tip – over switch so if the appliances turn down will be automatically switch off.
INSTRUCTIONS FOR USE
The selector switch knob enables you to select the following functions:
Selector switch:
0: OFF. Both the fan and the two heating elements are switched off
: “Cool air”. Only the fan is switched on
I
: “Warm air for gradual heating-up. ECO position (900 W): the fan and one of the heating elements are
switched on.
II:
“Hot air” for quick heating-up. Full power (1800 W): the fan and the two heating elements are switched
on.
OVERHEATING SAFETY DEVICE
To prevent damage and risks due to overheating, the built-in overheating safety device cuts off the power as
soon as the heating elements become too hot.
MAINTENANCE
Cleaning
.
We recommend that you clean your heater at least twice a year to remove accumulated dust and dirt.
-
Set the selector switch to position to switch off. Remove the mains plug from the wall socket. Wait for the
heater to cool down sufficiently.
-
You may clean the outside of the heater with a damp cloth or brush.
Do not use water or allow water to
come into the appliance. Do not use any abrasive and caustic cleaning agents!
-
Never touch the heater in water!
Danger to life!
-
Clean the air inlet and outlet grilles regularly with a vacuum cleaner, using the brush attachment.
Storage
Keep the original box in which the heater was packed to store it during the warmer months when it is not in
use. Clean the heater according to the instructions under.
Pack the heater in the original box and store it in a cool, dry place.
