BA 3200
11
3. To eliminate the possibility of shells or deteriorated/off eggs in your recipe, break eggs into separate
container first, then add to the mixture.
4. When mixing egg whites, be sure the bowls and beaters are thoroughly cleaned and dried. As even the
smallest amount of oil on beaters or bowl may cause the egg whites not to aerate.
5. Always start mixing at slow speeds. Gradually increase to the recommended speed as stated in the recipe.
6. Do not over-beat. Be careful that you only mix/blend mixtures until recommended in your recipe. Fold in
dry ingredients only until just combined. Always use the low speed. At any stage of mixing, overbeating can
cause toughness, close texture, lack of rising or excessive shrinkage. Climatic conditions. Seasonal
temperature changes, temperature of ingredients and their texture variation from area to area all play a part
in the required mixing time and the results achieved.
7. During mixing, ingredients may splash to the sides of the bowl. To scrape the bowl, turn the beaters to
the OFF position and using a plastic or rubber spatula, scrape the bowl. NEVER USE A KNIFE, METAL SPOON
OR FORK, as this may cause damage to the beaters and bowl. A light scraping after the addition of each
ingredient assists in achieving efficient mixing.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that
old household electrical appliances must not be disposed of in the normal unsorted municipal waste
stream. Old appliances must be collected separately in order to optimize the recovery and recycling of
the materials they contain, and reduce the impact on human health and the environment. The crossed
out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the
appliance, it must be separately collected. Consumers should contact their local authority or retailer for
information concerning the correct disposal of their old appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2006/95/EC and the
requirements of the EMC directive 2004/108/EC.
