MANUAL USUARIO ADR 91
20
Operating condition
The air conditioner must be operated within the temperature range indicated below:
Suggested tools for window kit installation
1. Screwdriver(medium size Phillips)
2. Tape measure or ruler
3. Knife or scissors
4. Saw(In the event that the window kit needs to be cut down in size because the window is too
narrow for direct installation)
For your safety
-
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or
any other appliance.
-
Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not
remove any prong from the power cord.
Electrical Information
-
Be sure the electrical service is adequate for the model you have chosen. This information
can be found on the serial plate, which is located on the side of the cabinet and behind the
grille.
-
Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper
grounding is important. The power cord is equipped with a three-prong grounding plug for
protection against shock hazards.
-
Your air conditioner must be used in a properly grounded wall receptacle. If the wall
receptacle you intend to use is not adequately grounded or protected by a time delay fuse or
circuit breaker, have a qualified electrician install the proper receptacle.
-
Ensure the receptacle is accessible after the unit installation.
Summary of Contents for ADR 70
Page 22: ...MANUAL USUARIO ADR 91 22 ...
