CP 100138
17
(1)
Match the same color wires from the fan and the receiver. Use the wire connectors to connect the
same color wires separately. (Fig 9)
(2)
Use the wire connectors to connect the ground wires, live wires and the neutral wires from the
receiver and the ceiling. (Fig 9)
(3)
Put the receiver into the bracket. Slide the upper canopy to the ceiling and tighten the screws. (Fig
10 & 11)
Fig 9 Fig 10 Fig 11
7.
Light fixture installation
(1)
Use the screwdriver to remove screws and detach the LED light panel. (Fig 12)
(2)
Connect the male/female connect from the motor and the light panel. (Fig 13)
Fig 12
Fig 13
(3)
Remove the screws from the flange, and then secure the light kit to the flange using the screws. (Fig
14)
(4)
Secure the LED light panel back to the light kit. (Fig 15)
