Orban OPTIMOD-FM 8600, Operating Manual

Page: 61 / 397

OPTIMOD-FM DIGITAL INSTALLATION
2-1
Section 2
Installation
Installing the 8600
Allow about 2 hours for installation.
Installation consists of: (1) unpacking and inspecting the 8600, (2) checking the line
voltage setting, fuse, and power cord, (3) mounting the 8600 in a rack, (4) connect-
ing inputs, outputs and power, (5) optional connecting of remote control leads and
(6) optional connecting of computer interface control leads.
When you have finished installing the 8600, proceed to “Quick Setup,” on page 2-
18.
DO NOT connect power to the unit yet!
1. Unpack and inspect.
A) If you note obvious physical damage, contact the carrier immediately to make
a damage claim. Packed with the 8600 are:
Quantity Item
1 Operating Manual
2 Line Cords (domestic, European)
2 Fuses (½ A-250V Slow-Blow for 115V; 250 mA-250V for 230V)
2 Fuse holders (gray for 115V fuses and black for 230V fuses)
4 Rack-mounting screws, 10-32 x ¾—with washers, #10
1 Null modem cable (for software upgrades and PC Remote connection)
1 Ethernet crossover cable
1 PC Remote Software CD
B) Save all packing materials! If you should ever have to ship the 8700 (e.g., for
servicing), it is best to ship it in the original carton with its packing materials
because both the carton and packing material have been carefully designed
to protect the unit. I
C) Complete the Registration Card and return it to Orban. (please)
The Registration Card enables us to inform you of new applications, per-
formance improvements, software updates, and service aids that may be
developed and it helps us respond promptly to claims under warranty