Orban OPTIMOD-FM 8600, Operating Manual

Page: 172 / 397

2-112
INSTALLATION ORBAN MODEL 8600
In the
System I/O
RDS tab, turn on the RDS generator by setting 57 kHz RDS con-
trol to
YES
. You can also set up the Modulation level and all other RDS I/O controls in
the System I/O RDS screens per the screenshot above. Table 2-1 shows a list of RDS
controls available in System I/O.
When you open I/O RDS screen in the PC remote when the System RDS controls are
active, the Optimod will update the RDS output when a control is changed or if you
select the
D
ONE
button.
Using Processing Presets
RDS adjustment via processing presets are available only from PC Remote.
To use processing presets , edit your on-air preset with the RDS checkbox
U
SE
S
YSTEM
RDS V
ALUES
deselected. Then set the RDS preset controls as required and
save the result as a new user preset. It is possible to make as many user presets as
you want whose audio processing controls are set identically, but the RDS controls
are set differently.
These controls are located in the processing preset’s RDS tab in PC remote.