17
EN
5
For easier storage, the power cord can be clamped around the
base.
Before storing the kettle, ensure it is turned off, clean and dry.
Ensure that the lid is securely seated in the closed position. Wipe
the network cord around the bracket at the bottom of the stand.
Place the kettle vertically on the base.
Do not remove any objects on the lid.
6
Do not disassemble! Repair your authorized service.
Removal of lime salt
Remove the stones in the interior of the kettle regularly according
to the frequency of use of the kettle. When using the kettle
regularly (3 to 5 times a day) we recommend removing the
stones:
- once a month in areas with hard and very hard water;
- 1 to 2 to 3 months in areas with soft and medium hard water.
For cleaning, use a diluted vinegar or lime acid remover. Remove
the lime salt and use only according to the manufacturer‘s
instructions.
Mineral deposits can cause unwanted staining of the interior
of the kettle and watermark after a certain time. Remove these
deposits with a special mineral disposal agent available in most
supermarkets or department stores.
An alternative procedure
1
Fill the kettle with 2/3 of a solution of one part of vinegar and two
parts of water, bring the solution to boil and leave to stand for the
next day.
2
Empty the kettle, fill with clean water, boil water and then pour.
Repeat this procedure until the kettle is completely clean and
ready for use.
