14
EN
Operation
1.
First, make sure that the HOT / OFF / COLD switch on the control
panel is set to OFF, then connect the device to the power. You can
use mains power (AC 230 V ~) or car power (DC 12 V).
Power supply in the car
Use the supplied car power cord. Connect the cable end to be
connected to the device to the 12 V connector on the device
and the other cable end to for the cigarette lighter and car power
connector, connect to the car connector.
Set the mode switch from the center
OFF position to the HOT or COLD
position.
Power supply
Use the supplied power cord for mains power.
Plug the end of the power cord to be connected to the device into
the 220 V - 240 V connector on the device, and plug the other
end of the power cord into an electrical socket with the specified
voltage.
Set the mode switch from the center
OFF position to the HOT or COLD
position.
