16
EN
Using the device
1.
Place the device on a suitable flat and stable surface.
2.
Select the baking plates you will use.
Warning!
• Before changing the platter, the toaster must be disconnected from the mains.
Removal of plates
• Slide the lock to the right (top lock) and to the left (bottom lock) in the arrow
direction to release the top/bottom plate and then select them.
Inserting a Plate
• Slide the edge of the top plate under the left and right hinges. Push the plate
toward the toaster until the tab clicks. Attach the bottom plate in the same way.
3.
Plug the power cord into an electrical outlet with a protective pin (230 V ~,
50 Hz). The red indicator light lights up. The indicator lights continuously
during the time the device is connected to the mains power supply. When the
operating temperature (baking temperature) is reached, the green indicator
light turns on. The device has reached the required temperature and is ready
for use. The thermostat keeps the operating temperature from now on. This is
accompanied by a repeated flashing of the green indicator light.
4.
Open the top and insert the prepared food into the machine (eg, two recipe
toasted bread rolls). Close the shutter so that the locking clip clicks on the
handle.
5.
The green light will turn on and off as soon as the thermostat turns on and off
the heating.
6.
Open the top and select the prepared food using a wooden flat baler or similar
tool. Do not use any sharp or sharp objects to avoid damaging the anti-friction
layer of the baking tray.
7.
If you do not cook, make sure that the baking plates are always closed.
8.
When the baking process has finished, disconnect the power cord from the
mains and allow the appliance to cool down.
