9
EN
Operation
Before using this device for the first time
• Remove all protective films and stickers from the device.
1
Plug the USB connector into the optional AC adapter (5 V DC output
voltage, 1,000 mA) or the USB connector on a turned-on PC. Plug the
AC adapter into an electrical socket.
2
Switch on the fan with button
4
, the fan starts at the lowest speed
- the first red operation indicator lights up.
3
Set the required fan speed by briefly pressing button
4
:
- medium speed: 2 red operation indicators illuminate,
- highest speed: 3 red operation indicators light up
4
If oscillation is required, press and hold button
4
, the blue oscillation
indicator lights up and the fan starts to oscillate.
5
Switch off the fan with button
4
.
Cleaning and maintenance
For the fan to work properly, it needs to be cleaned regularly.
Switch off the device before cleaning.
Cleaning and storage
• Store the device in a safe, cool and dry place.
• Clean the device with a soft cloth dampened with water.
In case of heavy soiling, you can dampen the cloth in a mild detergent
solution.
• Do not use aggressive, harsh cleaning agents or thinners. There is a risk
of surface damage.
• Do not chemically clean the device. There is a risk of surface damage.
• The device must not fall to the ground during cleaning.
• Make sure that no water enters the device.
If this happens, remove the batteries and do not use the device until it is
completely dry. Test whether the device will work.
• Never immerse the device in water or other liquids when cleaning.
Notifications!
• Never attempt to repair the device yourself!
• The device does not require special maintenance.
