background image

6

EN

disruption of the insulating state and consequently fire.

•  Do not expose the appliance to water or moisture. The ingress of water 

into the appliance increases the risk of electric shock.

  If the power cord is wet or the water has penetrated the water, 

disconnect it immediately from the mains. If the appliance is plugged 

into a mains socket and if possible, turn off the power circuit before 

attempting

  unplug the power. If you are pulling wet wires from a live power source, 

be very careful.

•  If the electrical equipment is installed (connecting) the protective covers 

are dismantled, the electrical parts must not be accessible to the user 

when the installation is finished.

1.4 Safety of persons

•  This appliance is intended for use and operation by persons without 

electrotechnical qualification - lay people, according to the instructions 

specified by the manufacturer.

•  Device operation includes activities such as switching on and off, user 

manipulation and setting of operating parameters, visual or auditory 

inspection of the equipment, and user cleaning and maintenance.

•  This appliance can be used by children under the age of 8 and 

persons with reduced physical, sensory or mental capabilities or lack 

of experience or knowledge when supervised or instructed to use the 

appliance safely and understand the dangers involved.

•  Children may not play with the appliance.
•  Cleaning and maintenance for users may not be performed by children 

unattended.

•  Always keep the appliance out of reach of children during use and 

operation. Be sure to download the appliance even for a freely 

accessible power cord.

•  Always be careful when operating the electric appliance! Do not use 

an electric appliance if you are overly tired, under the influence of 

medication or narcotic drugs that reduce attention and focus.

•  Inattention during operation may result in serious injury.

1.5 Cleaning, maintenance and repairs

•  Observe the normal user cleaning and maintenance of the appliance 

in the recommended way. Do not use solvents or harsh cleaners for 

cleaning. Pollution and visible stains from finger contact, respectively. 

Summary of Contents for OH-11




















Reviews: