background image

5

EN

•  Do not bend, crush or otherwise expose the power cord of the device to 

mechanical stress or external heat sources. Damage to the power cord may 

result in electric shock.

•  When the power cord is damaged, disconnect the device from the mains and 

do not use it again.

•  If the power cord is damaged, it must be replaced by the manufacturer, its 

service department or a similarly qualified person to avoid the risk of electric 

shock.

•  Regularly check and maintain the electrical device as well as the power 

cord and power socket. Disconnect the power plug regularly and clean it if 

necessary. Pollution by dust or other substances may cause disruption of the 

insulating state and consequently fire.

•  Do not expose the device to water or moisture. The ingress of water into the 

device increases the risk of electric shock.

  If the power cord is wet or the water has penetrated the water, disconnect it 

immediately from the mains. If the device is plugged into a mains socket and if 

possible, turn off the power circuit before attempting

  unplug the power. If you are pulling wet wires from a live power source, be very 

careful.

•  If the electrical equipment is installed (connecting) the protective covers are 

dismantled, the electrical parts must not be accessible to the user when the 

installation is finished.

1.4 Safety of persons

•  This device is intended for use and operation by persons without 

electrotechnical qualification - lay people, according to the instructions 

specified by the manufacturer.

•  Device operation includes activities such as switching on and off, user 

manipulation and setting of operating parameters, visual or auditory inspection 

of the equipment, and user cleaning and maintenance.

•  This device can be used by children under the age of 8 and persons with 

reduced physical, sensory or mental capabilities or lack of experience or 

knowledge when supervised or instructed to use the device safely and 

understand the dangers involved.

•  Children may not play with the device.

•  Cleaning and maintenance for users may not be performed by children 

unattended.

•  Always keep the device out of reach of children during use and operation. Be 

sure to download the device even for a freely accessible power cord.

•  Always be careful when operating the electric device! Do not use an electric 

device if you are overly tired, under the influence of medication or narcotic 

drugs that reduce attention and focus.

•  Inattention during operation may result in serious injury.

Summary of Contents for HR-109
















Reviews: