background image

3

EN

Safety of the operating environment

•  Do not use the device in an industrial environment or outdoors!

•  Do not expose the device to:

-   sources of excessive heat or open fl ame,

-   dripping or splashing water

-   vibration, shock and excessive mechanical stress

-   insects, animals and plants,

-   aggressive and chemical substances.

•  The operating environment of the equipment must always be in accordance 

with the established essential characteristics.

Operating environment characteristics:

1. Ambient temperature: +5 ÷ +40 ° C

2. Humidity: 5 ÷ 85%

3. Altitude: 000 2,000 m

4. Water occurrence: occasional water condensation or water vapor

5. Occurrence of foreign bodies: the amount and type of dust are insignifi cant

6. Degree of protection: min. IP20 (the device is protected against contact with 

dangerous parts by the fi nger and unprotected against water)

Electrical safety

•  Electrical Class III electrical devices are those that are powered by a low-

voltage (battery or accumulator) source and do not pose a hazard to the user 

due to electric shock.

Personal safety

•  This appliance is intended for use and operation by persons without electrical 

qualifi cations - by the layman, following the manufacturer‘s instructions.

•  Operators of the equipment include activities such as switching the equipment 

on and off, user manipulation and setting of operating parameters, visual or 

auditory control of the equipment and user cleaning and maintenance.

•  This appliance may be used by children from 8 years of age and persons with 

reduced physical, sensory or mental abilities or with a lack of experience or 

knowledge if they are supervised or instructed in the safe use of the appliance 

and understand the dangers involved.

•  Children must not play with the appliance.

•  Cleaning and maintenance by users must not be performed by children without 

supervision.

Cleaning, maintenance and repair

•  Only carry out normal cleaning and maintenance of the appliance in the 

recommended manner. Do not use solvents or abrasive cleaning items for 

cleaning. Pollution and visible spots from touching fi ngers or hands can be 

cleaned using cleaning agents designed to clean household appliances.

•  Never clean the device in a way that may cause immersion in liquid and liquid 

fl ow into the device.

•  Clean the electrical/electronic parts only with a damp cloth and wipe dry or 

allow to dry.

•  Keep the appliance clean and dry.

•  Do not disassemble the appliance!

•  Never repair the electric appliance yourself!

Summary of Contents for EV-520











Reviews: