background image

14

EN

Operation

1.

  Connect the device only to a 230 V ~ 50Hz power outlet with a protective plug 

that is installed in accordance with applicable regulations.

2. 

 Using the regulator (

C

), you can select the baking degree from 1 to 6. To verify 

baking, we recommend setting the baking level lower than the maximum and 

repeated baking several times. This gives you the desired shade of toasting.

3.

   If you are using frozen bread and want to defrost it, press the DEFROST 

button 

(F

). The light comes on. When the defrost is complete, the unit will shut 

down, the indicator light will go out and the inner carriage will move up.

4. 

 If you are using a chilled pastry and want to heat it, press the REHEAT button 

(

E

). The light comes on. When the defrost is complete, the unit will shut down, 

the indicator light will go out and the inner carriage will move up.

5. 

Insert 2 slices of bread and a slider into the pastry slots using the knob (

B

)    

Pull down until it locks.

6. 

 The appliance will start working and when baking is completed according 

to the set level, it will automatically switch off and push the inner carriage 

upwards.

7. 

 The cooking process can be interrupted at any time by pressing the CANCEL/

STOP button (

G

).

8.

  Allow the device to cool before storing.

Advise 

•  

Thin and dry slices of bread are baked faster than wet and thick slices.

•   If you feel a burn when baking, stop baking.

•   Do not put toast coated with butter or other spread!

Warning!

  Do not put wrapped bread in the toaster. Before baking, strip the wrapped 

pastry with packing material.

Cleaning the crumb tray 

Regularly clean the crumb tray (

D

) when using the machine. The dispenser is

located at the bottom of the toaster.

•   Remove the crumb tray (

D

) from the toaster and remove the crumbs, wipe it 

with a clean, dry cloth and put it back in place.

•   Clean the crumb tray (

D

) after each use of the toaster. Make sure that crumbs 

do not accumulate in it. Otherwise they could catch fire.

.

Cleaning

•  

Always unplug the appliance and allow it to cool before cleaning.

•   Do not attempt to remove a jammed slice of bread from the machine without 

unplugging the machine.

•   Use only a slightly damp cloth to clean the machine.

•   Do not use any solvents or abrasive cleaners.

•   Do not allow debris to accumulate in it as it may catch fire.

Summary of Contents for Crispo
















Reviews: