Orava AC-011 Instruction Manual Download Page 7

7

EN

1.5 Cleaning, maintenance and repairs

•  Observe the normal user cleaning and maintenance of the appliance in 

the recommended way. Do not use solvents or harsh cleaners for cleaning. 

Pollution and visible stains from finger contact, respectively. The hands 

can be cleaned using detergent detergents specially designed to clean 

household appliances.

•  If you do not use the appliance, clean it or disconnect the appliance from 

the power supply when the appliance is faulty.

•  Electrical appliances that are cleaned after use and are not intended to be 

completely or partly immersed in water or other liquid, protect against the 

effects of dripping and / or splashing water and before immersion.

•  Electric household appliances, like all other technical devices, are subject 

to the surrounding environment and natural wear. Since the legal framework 

of regular maintenance is not laid down for lay-in electrical household 

appliances, the manufacturer recommends that the user have the appliance 

checked and cleaned at least once a year by a specialist workshop.

•  By doing so, it is possible to achieve safety, operational reliability and 

increased service life.

•  Do not disassemble the electric appliance! The appliance works with a 

dangerous voltage. For this reason, always switch off the appliance and 

disconnect it from the mains supply during user maintenance. In the event 

of a fault, please have the repair serviced by an authorized service center.

•  Before calling a service:

1. Verify that you are unable to remedy the malfunction yourself according 

to the procedure described in the chapter „Remedy of operating faults“.

2. Turn the appliance off and on to make sure the fault reappears.

3. If the malfunction of the appliance persists after these operations, call the 

nearest specialist service center.

•  Never repair the electric appliance yourself!

•  Unauthorized, unqualified and improper use of an electric appliance may 

result in electric shock or other serious injury.

•  Only carry out the warranty or post-warranty repair of an electrical 

appliance to an authorized qualified person (*).

(*) Competent qualified expert: the sales department of the manufacturer or importer or the person 

qualified and authorized to carry out this type of activity with the ability to avoid all risks.

Summary of Contents for AC-011





























Reviews: