Rear Panel of the PAP10 Speaker:
1. USB/SD Input
2. LED screen
3. Repeat:AUX/MP3/Bluetooth
MP3 Next Song
MP3 Play
MP3 Prev Song
Mode:Aux/MP3/Bluetooth
4. Audio 1 Input
5. Audio 2 Input
6. DC 12V Input
7. Input Volume
Additional Speaker:
If you want to add an additional speaker for extra volume output, we
recommended the passive
ORATOR
PA10 speaker that is manufactured for this
purpose. The PA10 is connected using the audio output (RCA) connectors.
Audio Input:
If you want to input audio from another audio player, such as an external DVD or
music player, use the audio input (RCA) connectors.
Microphone (cable) Input:
The PAP10 is fitted with 2 microphone input connectors (MIC1 and MIC2) that
enable you to connect a traditional cable microphones. The input volume can be
controlled by the M. VOL (2) control knob.
Guitar (cable) Input:
The PAP10 is fitted with a guitar input connector (GT1) that allows you to
connect an electric guitar. The input volume can be controlled by the
GUITAR.VOL (1) control knob.
Echo Function:
The PA101 is fitted with an echo function that is normally only used for music
(karaoke) operation. If used for normal speech, the audio can sound a little
distorted so we recommend the control being left at -.
Audio Control
:
The PAP10 has 3 control knobs for basic audio functions. The VOLUME (6)
control is the Master Output volume controlling the output volume. Bass (4) and
Treble (5) controls allow you to create the balance between Bass & Treble in the
output that you desire. For normal operation, it is recommended that both are
centred (12 o’clock position).
8. Treble Volume
9. Bass Volume
10. Echo Volume
11. Main Volume
12. Microphone 1 Input
13. Microphone 2 Input
14. Output to passive speaker
15. Speaker Power on/off
16. UHF Mic Antenna
17. Wireless Mic Volume
18. UHF Micro Power on/off
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
