4
(Fig. 8)
(Fig. 9)
Incorrect
Correct
a.
Flip telescopes down so they touch the eyeglass lens.
b.
Your eye pupil distance is preset to your measured
distance. Verify that image is correct (Fig. 8).
c.
If incorrect, rotate pupil knob until you see one oval or
circular field without overlapping circles (Fig. 9).
5b. Check Interpupillary Distance –
Flip-Up Telescopes
OPERATING INSTRUCTIONS
Orascoptic
®
Telescopes
Your telescopes’ downward working angle has been
preset at the factory. To check the angle:
a.
Put the telescopes on and look downward at your
targeted operating site.
b.
Have someone look at them from the side. They
should be able to draw an
imaginary line
from your
pupils through the middle of the telescopes to the
target
(Fig.10).
c.
If they are not aligned, raise or lower the frames as
explained in Step 5 to adjust so that the telescopes are
in alignment with the imaginary line.
d.
If you require assistance, call technical support
(see
back of manual).
(Fig. 10)
Declination Angle
6a. Check Downward Angle –
Through-the-Lens and
Through-the-Flip Telescopes
Summary of Contents for Telescopes
Page 1: ...Telescope User Manual ...
