background image

1.3.3 Activated carbon filter

     

The activated carbon filter consists of a vast system of highly adsorbent molecular sized pores to 
remove gases, light odors and VOC s(volatile organic compounds). 

1.3.4 Anion generator 

Low level and ozone safe negative ionizer to freshen and balance the air(ie neutralize a surplus of 
positive charges from TV’s and computer monitors). 
 

1.3.5 Air Quality Sensor (AQS) 

Measures and displays th e air quality. In Auto mode, the unit a utomatically adjusts its fan speed 
based upon the air quality readin g. The sensor needs about  10 minutes to warm up to reach it s 
maximum sensitivity. The display will flash AQS to indicate it is warming up and will stop flashing 
and display AQS when ready. 

 

1.4 Placement 

In  order to  get  better p erformance  in cleaning,  it  is recommende d  to pla ce  the  purifier on the  
ground or a stable surface around 2 feet high.    Since the air is drawn in through the front of the air 
purifier it can be placed near a wall. 
 

2. Function Description 

2.1 Standby 

In standby mode, the standby indicator illuminates in red to show the air purifier has been plugged 
in and has power but is not operating. 
 

2.2 Refresh 

Anions are generated under this mode (low level negative ions). 
 

2.3 Fan Speed 

There are four different fan speeds with Silent the lowest and Turbo the highest fan speeds. 
 

2.4 Air Quality Indicator 

There are five levels of air quality as indicated below: 

 

Note: the air quality reading is located above the “AQS”.    Since the air quality sensor is located on 
the  air purifi er  the reading will be  in  the area of   the air purifier .    In  many cases it will have a 
reading of Excellent or Very Good.

 

 

2.5 Auto 

In auto mode, the fan  speed of the air purifier will be set aut omatically based on the air quality  
detected  by the sensor .   W e  suggest  setting  the  fan speed   where  you  would like  it  before 
pressing Auto.    Once pressed, the fan will stay at the same speed but the fan speed display will 
reflect the air quality reading as in the table below and not the current fan speed.    For example, if 

  4

Summary of Contents for OVHM80










Reviews: