26
Batteries and recharging
It is recommended to use a 12v deep cycle battery. In order to preserve the life of the batteries, it is preferable to recharge
them fully immediately after use. Please charge your battery in a well-ventilated place.
Below is an estimate of the engine operating time based on the battery used and your engine. It is given for continuous
use at maximum power.
Note that the operating time depends on many factors (weight on board, wind, waves, current, attachment used...)
In order to preserve the battery it is best not to reach its maximum discharge.
CAUTION: Only use a battery with an output voltage of 12V. The use of a battery with a different output voltage will
put your motor out of warranty.
Connecting the battery
Before powering your motor, please check that the bar is set to speed 0.
First, connect the red clamp to the «+» terminal, then the black one to the «-» terminal.
Speed control
After connecting the motor, you can control the speed by turning
the bar on its axis, and selecting the speeds forward or reverse
(Fig. H).
Maximum
60 Ah
85 Ah
105 Ah
115 Ah
150 Ah
35 lbs
1h 40min
2h 25min
3h
3h 15min
4h 15min
45 lbs
1h 20min
1h 50min
2h 20min
2h 30min
3h 20min
55 lbs
1h 05min
1h 30min
1h 55min
2h 05min
2h 40min
65 lbs
55 min
1h 15min
1h 35 min
1h 45min
2h 15min
!
Fig.H