4
CRUSH PRO SERIES OWNERS MANUAL
CR60C, CR120C & CR120H
VOLUME (Clean/Dirty Channel)
:
This controls the volume of the corresponding channel. At higher VOLUME settings, the CLEAN
channel will begin break up into natural overdrive for a more vintage ‘crunch’ tone. The overall
volume can then be reduced by turning down the MASTER VOLUME control.
BASS (Clean/Dirty Channel):
This controls the low frequency response of the corresponding channel. Increasing the BASS
produces deeper tones.
TREBLE (Clean/Dirty Channel):
This controls the high frequency response of the corresponding channel. Increasing the TREBLE
brightens the sound whilst reducing the TREBLE darkens the tone.
MIDDLE (Dirty Channel only):
Controls the mid-range frequency response. Reducing mids will ‘thin out’ the tone, and can be
used for a ‘scooped’ sound. Increasing the mids adds fullness.
GAIN (Dirty Channel only):
This controls the GAIN level. Increasing the GAIN will increase the distortion level. NOTE:
With the GAIN control set to zero, no sound will be heard on the Dirty Channel. At lower
GAIN settings, the Dirty Channel VOLUME control may have to be increased to compensate.
