background image

panel agrees with the mains voltage from your AC mains outlet before connecting the mains cord/plug.

If the product is to be used outside of the factory set region, ensure the voltage selector switch (found on
the rear or side panel) is set to the correct voltage for the new country/region and that the appropriate
mains fuse is fitted in the pull-out fuse tray below the IEC mains input.

The correct mains fuse rating for your product is printed on the chassis. Use only the same 250V type
and rating as specified for the product. Different operating voltages may require the use of different types
of line cord and attachment plugs. If you are unsure, contact your Orange Dealer.

This Orange product conforms to UL 60065:2001 (Seventh Edition) + A1:2005 + A2:2010 for Audio,
Video and Similar Electronic Apparatus. Certified to CAN/CSA CAN/CSA-C22.2 No. 60065:03

This Orange product complies with the WEEE Directive (2002/96/EC) marking requirement. This affixed
product label indicates that you must not discard this electrical/electronic product in domestic household
waste. Please contact your local authority for details of your nearest approved recycling facility.

BASS BUTLER BASS PRE AMP

The Bass Butler was conceived over many IPAs in a small bar on Santa Monica BLVD called the Surly
Goat  by  Technical  Director Adrian  Emsley  with  Morgan  Nicholls  (who  played  bass  in  The  Who  at  the
2012 Olympics closing ceremony and also plays the keyboards in Muse). The idea was to have his epic
bi-amp touring rig in a small, portable preamplifier pedal. We are confident that you will be delighted with
your new purchase and that it will provide you with many years of enjoyment. 

Summary of Contents for Bass Butler














Reviews: