background image

FOUR STROKE SERIES USER MANUAL 

V1.0 

 

 

 

 
 

 

This apparatus must be connected to a mains socket outlet with a protective earthing connection.  

The voltage selector switch and mains fuse  are set at the factory for the country or region in which this 
Orange product is intended to be sold. To prevent serious damage to the product, ensure that the rated AC 
mains voltage indicated on the product's rear panel agrees with the mains voltage from your AC mains outlet 
before connecting the supplied mains cord. Do not tamper with the voltage selector switch. 

If the product is to be used outside of the factory-set region, contact Orange amplification. 

The  correct  mains fuse  rating  for  the  product  and  region  is printed  on the  chassis  next to the  AC  mains 
inlet.

 

Use only the type and rating specified for the product

.  

 

The 

4 Stroke 

may be operated without a speaker connected. When using a speaker cabinet, make sure the 

correct  load  (Ω)  is  connected.  Failure  to  observe  these  points  may  cause  damage  to  both  the  amp  and 
cabinet(s)! Speaker outputs are wired in parallel: 

 

1 x 8 Ohm cabinet:      Use either speaker output 

 

2 x 8 Ohm cabinets:    Use both speaker outputs 

 

1 x 4 Ohm cabinet:      Use either speaker output  

 

Never use two speaker cabinets of mismatched impedance! 

 

Never connect a speaker load which is less than 4 Ohms! 

 

Always connect to a speaker load of suitable power handling: 

o

 

One cabinet:

 The cabinet’s power rating should be 

at least

 

equal

 to the amp’s output power. 

o

 

Two cabinets: 

Each cabinet should have a rating of 

at least 50%

 of the amp’s output power. 

 

Never connect speakers using an instrument cable! Only use a quality dedicated speaker cable. 

 
 

Under  normal  operating  conditions,  the  amplifier  may  generate  heat.  During  sustained  periods  at  high 
volume levels the internal fan will start operate and may be audible. 

Do not obstruct the fan or the cooling 

vents and install the unit with space around it to allow ventilation.  

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Never place 
liquids or vessels containing liquid on or near the amplifier.  

 

 

IMPORTANT! 

BEFORE USING YOUR AMPLIFIER 

SPEAKER OUTPUTS 

 

 

VENTILATION & GENERAL USE 

Summary of Contents for 4 Stroke Series









Reviews: