Manual for Tire Pressure Monitoring Systems, TPMS
22/22
4. The receiver cannot receive signal from any of the four tires after its power is
turned on the numeric values representing tire locations displayed on the
screen all become “E1”.
1. There is interference from other electronic device in the vehicle.
Solution
：
Remove other electronic device in the vehicle to determine if TPMS is
interfered by those removed devices.
2.
The inner circuits of the display panel failed.
Solution
：
Ask your distributor to have your receiver replaced, reconfigure its ID
using the Tire Switching Mode (Mode IV), and send the defected receiver back to
manufacturer for repair.
5. The buzzer has no sound output.
1.
The inner circuits of the receiver failed.
Solution
：
Ask your distributor to have your receiver replaced, reconfigure the IDs
of the tires using the Tire Switching Mode(Mode IV),and then send the defected
receiver back to manufacturer for repair
6.
The pressure (or temperature)values show the wrong tire locations
1.
The IDs of the four tires are not configures correctly
Solution
：
Ask your installation supplier to reconfigure the IDs of the tires by using
the Tire Switching Mode (Mode IV or Mode V).
2. After rotating the tires, it cannot reconfigure the IDs from sensors.
Solution
：
Ask your installation supplier to reconfigure the IDs of the tires by using
the Tire Switching Mode (Mode IV or Mode V).
Thank you for your purchase and enjoy your TPMS!
Manufacturer:
Orange Electronic Co., LTD
www.orange-electronic.com
5F, No.29, Keya Rd, Central Taiwan Science Park, Taichung 42881, Taiwan
Phone: +886-4-2560-2766
Email:
