Oracom ORC-350, User Manual

Page: 7 / 21

12 11
• Press the mode button for more than one second in music mode or
voice mode. The play menu appears.
• Repeat, EQ, File, Language, Logo, Display etc. are in the play mode.
• See page.19 "Using the menu mode" for details of setting menu.
• Tune to the station you want to program. (SCAN mode)
• Press REC button briefly.
• Select a preset number (from 1 to 15) by pushing the navi stick toward
◀◀ / ▶▶.
• Press REC button to program current station.
• To adjust the volume
: The volume range can be adjusted from 0 to 40.
: Push the navi stick toward
to turn the volume level up.
: Push the navi stick toward to turn the volume level down.
• Press the mode button briefly and select FM radio mode by pushing the
navi stick toward or . Then, SCN(SCAN) or MEM(MEMORY) will be
shown on the right of the LCD display.
(SCN(SCAN) mode is for selecting frequency, MEM(MEMORY) mode is for
selecting programmed frequency)
• While in FM radio mode, press the ▶ button briefly to switch
SCAN ⇔ MEMORY
• In SCAN mode, push the navi stick toward
◀◀ / ▶▶
to increase or decrease
the frequency. (0.1MHz)
• FM station automatic tuning(SCAN mode) : Push the navi stick toward
◀◀ / ▶▶
for more than one second.
• To listen to a programmed station (MEMORY mode)
: Select a preset station number by pushing the navi stick toward
◀◀ / ▶▶.
Setting menu
Playing an FM radio station
Setting a favorite FM radio station
Adjusting the volume