Test the IPv4 or IPv6 Network Configuration
Note -
A dual-stack network connection is enabled when both the IPv4 and IPv6 State
properties are set to enabled. By default, Oracle ILOM is factory-configured with network
settings enabled for a dual stack (IPv4 and IPv6) network connection. If the IPv4 State property
is enabled (
SP/network state=enabled
), and the IPv6 State property is disabled (
SP/network
state=disabled
), Oracle ILOM supports an IPv4-only network connection.
d.
To commit the IPv4 and IPv6 pending network changes in Oracle ILOM,
type:
set /SP/network commitpending=true
Note -
All user sessions on the SP are terminated upon committing the IP network property
changes. To log back in to Oracle ILOM, use the newly assigned SP IP address.
Test the IPv4 or IPv6 Network Configuration
Use either the Oracle ILOM web interface or CLI to test the IPv4 or IPv6 network
configuration:
■
From the Oracle ILOM web interface:
a.
Click
ILOM Administration
→
Connectivity
→
Network
.
b.
On the Connectivity page, click the Tools button.
80
Oracle Server X8-8 Installation Guide • June 2019
Summary of Contents for X8-8
